Stainless steel crash bar, black for BMW R1250GS
349,90 €
Toimitusaika:
6-10 päivää
Osa numero
01-037-5162-0
sis. alv
No matter which way the GS should fall, the Touratech crash bar is right where it is needed. The most comprehensive all-round protection there has ever been for a boxer engine!
A "cage" of 25-mm strong, 2-mm thick stainless steel tubes completely encloses the cylinders. Any forces that occur are safely deflected and distributed to gently break them down. Numerous assembly points, intended bending points and the central strut guarantee safe protection not only of the cylinders, but also of the frame and engine of your R1250GS.
Despite the impressive tube diameter, the crash bar is positioned as closely as possible and symmetrically to the vehicle axis. It has practically no effect on the lean angles or ground clearance.
It blends perfectly with the looks of the R1250GS, completing the overall appearance - and is simply a part of it all!
Made exclusively of strong, stainless steel, the crash bar will not rust. Even deep scratches are less frightening, and can simply be ground off.
The assembly points are perfectly matched to the R1250GS! And needless to say, everything that is needed to fit it is included in the delivery.
In short:
- complete protection for the cylinders, including to the back and top
- safe deflection of any occurring forces without damaging the frame or engine
- no restrictions to leaning angle freedom
- made of 25/2 mm stainless steel tubes
- Made in Germany
For combination with the Touratech cylinder guards 01-037-5130-0, 01-037-5131-0 and 01-037-5132-0, we recommend to use 01-037-5169-0.
Also fits the BMW "Option 719". Only the oil filler cap cannot be removed.
A "cage" of 25-mm strong, 2-mm thick stainless steel tubes completely encloses the cylinders. Any forces that occur are safely deflected and distributed to gently break them down. Numerous assembly points, intended bending points and the central strut guarantee safe protection not only of the cylinders, but also of the frame and engine of your R1250GS.
Despite the impressive tube diameter, the crash bar is positioned as closely as possible and symmetrically to the vehicle axis. It has practically no effect on the lean angles or ground clearance.
It blends perfectly with the looks of the R1250GS, completing the overall appearance - and is simply a part of it all!
Made exclusively of strong, stainless steel, the crash bar will not rust. Even deep scratches are less frightening, and can simply be ground off.
The assembly points are perfectly matched to the R1250GS! And needless to say, everything that is needed to fit it is included in the delivery.
In short:
- complete protection for the cylinders, including to the back and top
- safe deflection of any occurring forces without damaging the frame or engine
- no restrictions to leaning angle freedom
- made of 25/2 mm stainless steel tubes
- Made in Germany
For combination with the Touratech cylinder guards 01-037-5130-0, 01-037-5131-0 and 01-037-5132-0, we recommend to use 01-037-5169-0.
Also fits the BMW "Option 719". Only the oil filler cap cannot be removed.